PE22100 Isolated Transformer Driver
The PE22100 is a push-pull driver for driving small transformers for isolated power supply applications. The PE22100 drives the primary of a center-tapped transformer from a 3.0V or a 5V supply to deliver an isolated power supply. The device...
PE42823 High-Power Receiver Protection RF Switch
The PE42823 is a reflective single pole, double throw (SPDT) switch designed for use in high-power and high-performance wireless infrastructure applications. Covering a wide frequency range from 700 MHz to 6 GHz, the RF protection switch delivers excellent single-event...
PE42427 RF Switch
The PE42427 is an SPDT RF switch designed to cover a broad range of applications from 5 MHz to 6 GHz, including low spurious cable CPE applications. The PE42427 meets the stringent linearity and spurious emissions requirements for cable CPE...
SP6T/SP8T/SP12T RF Switches - Optimized for Wireless Infrastructure
The UltraCMOS® PE42462 (SP6T), PE42482 (SP8T) and PE42412 (SP12T) RF switches are optimized for wireless infrastructure applications. With high port-to-port isolation, high linearity, low insertion loss and exceptional power handling, these absorptive switches are optimized for 4G and 4.5G...
SP6T/SP8T/SP12T RF Switches - Optimized for Test & Measurement
Optimized for test & measurement applications, the UltraCMOS® PE42562 (SP6T), PE42582 (SP8T) and PE42512 (SP12T) RF switches cover a wide frequency range from 9 kHz to 8 GHz. The absorptive switches have an external VSS pin to eliminate spur....
SP6T/SP8T/SP12T RF Switches - Extended Temperature Range
The PE426462 (SP6T), PE426482 (SP8T) and PE426412 (SP12T) high-throw count RF switches deliver industry-leading performance across a wide temperature range from -55 to +125 degrees Celsius. Each absorptive high-throw count switch has a fast switching time of approximately 200...
PE426525 High Frequency Switch (60 GHz) - Extended Temperature Range
Supporting a wide frequency range from 9 kHz to 60 GHz, the PE426525 is a single-pole double-throw (SPDT) RF switch. The reflective switch delivers an incredibly fast switching speed of 8 nanoseconds. With exceptional performance across all key RF specifications,...
PE42525 High Frequency Switch (60 GHz)
The PE42525 is a reflective SPDT RF switch die that supports a wide frequency range from 9 kHz to 60 GHz. This wideband flip-chip switch is pin compatible to the PE42524 and the PE426525. It delivers low insertion loss, fast...
PE42426 SPDT RF Switch
The PE42426 is a reflective SPDT RF switch designed for use in land mobile radio (LMR) and general switching applications. It delivers high linearity and excellent harmonics performance across the entire operational band. The PE42426 is packaged in a...
PE41901 Image Reject Mixer
The PE41901 is a passive double-balanced, Ku band mixer with image rejection. It integrates two mixers, a local oscillator (LO) path 90-degree coupler and RF port baluns on a single die. Integrating these functions provides good image rejection, reduces...